It provides a method of charging the coach battery from the engine. If the ignition switch is on, the control allows the voltage to drop below 13.0 volts for approximately 5 seconds, before the solenoid is opened to insure the alternator’s full output is available for important chassis functions. It provides a method of charging the coach battery from the engine alternator and charges the chassis battery from the converter when the coach is plugged into. The BIRD (BI-DIRECTIONAL ISOLATOR RELAY DELAY) performs two important functions. This might occur when the converter is heavily loaded. If the ignition switch is off and the battery voltage drops below 26.6 volts for approximately 5 seconds, the solenoid is opened to prevent the chassis battery from being discharged by the coach loads. (normal charging voltages are from approximately 26.6 to 28.8 volts.)Īfter the solenoid has been closed, the system continuous to sense the voltage. Anytime either battery voltage goes above 26.6 volts for approximately 5 seconds, the solenoid closes. When either battery is being charged, the controller will close the isolator solenoid, connecting the two batteries together, charging them both. The Intellitec’s Bi-Directional Isolator Relay Delay – Diesel operates by sensing the voltages on both batteries. Used For: Delays The Function Of The Isolator Relay When The Coach Is Started Voltage Rating: 10 To 18 Volts Features Bi-Directional Isolator Relay Delay Offers A New Approach To Charging Batteries In An RV Application Charges Both Batteries When Either One Is Being Charged. In order to use this type solenoid for continuous duty, the controller will engage it with full voltage and then reduce the coil voltage to approximately 4 volts to hold it in. Unlike diode isolators, this system provides an engine driven alternator with main battery before connecting the auxiliary battery. To connect the two batteries together under proper conditions, it operates in combination with an intermittent duty solenoid, similar to ones used as diesel starter solenoids. Intellitec Isolator Relay Delay 00-00629-120 Intellitec’s Battery Isolator Relay Delay offers a low cost, reliable approach to charging multiple batteries. The unit is housed in a plastic enclosure for mounitng in an engine compartment. The controller also senses heavy loads on either battery to prevent the wrong battery from being inadvertently discharged. If neither battery is being charged, the batteries are fully isolated. When the coach is plugged into shore power, both batteries will be charged from the converter. When the coach is being driven, both batteries will be charged from the engine’s alternator. Unlike proper systems that only allowed charging the RV battery from the engine’s alternator, the Bi-Directional Isolator Relay Delay – Dieselchargers both batteries when either one is being charged. Adding a small dash-mounted switch will allow emergency starts of diesel engines, requiring up to 800 amps of starter current. Intellitec’s Bi-Directional Isolator Relay Delay – Diesel offers a new approach to charging batteries in an RV which uses an alternator. It Operates By Sensing The Voltages On Both Batteries.Intellitec Bi Directional Isolator Relay Delay – Diesel 24v 00-00839-240 It Operates In Combination With A Conventional Continuous Duty Solenoid To Connect The Two Batteries Together Under The Proper Conditions. When either of these voltages exceeds 13.1 Volts for approximately 2.5 minutes, which happens when either. The Unit Is Housed In A Plastic Enclosure For Mounting In An Engine Compartment. It operates by sensing the voltages on both batteries. The Controller Also Senses Heavy Loads On Either Battery To Prevent The Wrong Battery From Being Inadvertently Discharged. If Neither Battery Is Being Charged, The Batteries Are Fully Isolated. When The Vehicle Is Plugged Into Mains Power, Both Batteries Will Be Charged From The Converter. When The Vehicle Is Being Driven, Both Batteries Will Be Charged From The Engine’s Alternator. The Bi-Directional Isolator Relay Delay Charges Both Batteries When Either One Is Being Charged. Intellitec Bi-Directional Isolator Relay Delay
0 Comments
Leave a Reply. |